deformed bar astm a615

deformed bar astm a615

deformed bar astm a615 suppliers, distributors, production and supply of deformed bar astm a615, are committed to providing high-quality products, as well as excellent cutting, forming, drilling and other processing services. If you have any needs, please feel free to contact:

sales7steel@163.com


deformed bar astm a615

The steel bars of Grade 60 conform to ASTM A615 (American Standard for Testing and Materials) are available in sizes ranging from 10mm to 25mm in standard 12 meter lengths. Other specific diameters ranging from 28mm to 40mm can be rolled on order as per the ASTM A615/A615M-16 - Standard Specification for 1.3 Plain bars, in sizes up to and including 2 1 / 2 in. [63.5 mm] in diameter in coils or cut lengths, when ordered shall be furnished under this specification in Grade 40 [280], Grade 60 [420], Grade 75 [520], Grade 80 [550], and Grade 100 [690]. For ductility properties (elongation and bending), test provisions of the nearest smaller nominal diameter deformed bar size shall apply. Standard Specification for Deformed and Plain Carbon 3.1.1 deformed bar, n—steel bar with protrusions; a bar that is intended for use as reinforcement in reinforced concrete construction. 3.1.1.1 Discussion—The surface of the bar is provided with lugs or protrusions that inhibit longitudinal movement of the bar relative to the concrete surrounding the bar in such construction. ASTM A615 Reinforcement bar A615-60 Grade SteelJun 12, 2013 · ASTM A615 is an international material standard for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement for strengthening application. A615-60 grade Steel is higher in strength as compare to A615-40 steel. Dimensional Characteristics of A615-60 Grade Steels:The applicable diameter for this A615-60 GRADE material as defined in the A615 Rebar - ASTM A615 Grade Reinforcing Bar

Turning and Milling [5 Sets]

Turning-and-Milling
Technical Data Wuzhong Double Column Wuzhong Double Column Schess
Height 5000mm 6000mm 6500mm 3000mm
Load Bearing 160t 400t 600t 50t
Table Diameter Φ7200mm Φ10000mm Φ10000mm Φ3500mm
Max. machining Diameter Φ8000mm Φ12500mm Φ22000mm Φ4000mm
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 5-Axis Simultaneous Motion

Multi-Drilling Machine [32Sets]

Multi-Drilling Machine
Technical Parameters INNSE Italy Shenyang Machine Tool GDC60130MD, GDC3070MD DAE-YANG South Korea
X-axis, Y-axis, Z-axis 8000 4500 1000mm 13000 6000 500mm 7000 3000 500mm 6000 6000 800mm
Boring Diameter ≤Φ120mm ≤Φ100mm ≤Φ100mm Φ2 -Φ 100mm
Processing Depth ≤420mm ≤300mm ≤200mm ≤400mm

For more information, please contact:
sales7steel@163.com

Vertical Lathe [10 Sets]

Vertical Lathe
Technical Data Wuzhong Wuzhong Qizhong Qizhong Qizhong
Table Diameter Φl600mm Φ3150mm Φ3600mm Φ4000mm Φ4000mm
Max. Machining Diameter Φ2000mm Φ3500mm Φ4000mm Φ5000mm Φ5000mm
Height 1600mm 2500mm 2000mm 2500mm 4000mm
Load Bearing 5t 40t 32t 50t 50t

Floor-type Milling-boring Machine [11 Sets]

Floor-type Milling-boring Machine
Technical Data Wuzhong Wuzhong Pama
X axis
Y axis
(Z+W) axis
12000
4000
(800+800) mm
16000
5000
(1200*1200)mm
12000
3000
(1200+1000)mm
Table Size 3000*3000mm 4000*4000mm 3600*4000mm
Load Bearing 60t 100t 65t
Boring Bar Dia Φ160mm Φ200mm Φ160mm

Technical Data Pama INNSE260 INNSE280
X axis
Y axis
(Z+W) axis
20000
5000
(1200+1000)mm
17500
6000
(1400+1600)mm
25700
8000
(1800+2000)mm
Table Size 4000*4000mm 3500mm*5000mm 5000mm*9000mm
Load Bearing 100t 100t 250t
Boring Bar Dia Φ180mm Φ260mm Φ280mm

For more information, please contact:
sales7steel@163.com

Portal-type Processing Center [16 Sets]

Portal-type Processing Center
Technical Data Schess, German Okuma, Japan Wuzhong Double Column Youjia(FV4224E) Youjia(FV3215)
Height 7000mm 1850mm 3000/1750mm 5000/2000mm 1170mm 970mm
Width between Columns 8000mm 3050mm 4300mm 6000mm 2400mm 1600mm
Length 50000mm 5000mm 20000mm 28000mm 4200mm 3200mm
Table Size 8000*40000mm 2500*4800mm 3000*26000mm 5000*30000mm 2000*4000mm 1400*3000mm
Rotary table Diameter Φ6000mm —— ——
Simultaneous 7-5 Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion
Technical Data Mitsubishi I II III, Japan
Height 1950mm 1950mm 2550mm
Width between Columns 4250mm 4250mm 3800mm
Length 10200mm 8200mm 6200mm
Table Size 3500*10000mm 3500*8000mm 3000*6000mm
Rotary table Diameter
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion

Deep-Hole Drilling Machine [11 Sets]

Deep-Hole Drilling Machine
Technical Parameters INNSE Italy DAE-YANG South Korea
X-axis, Y-axis, Z-axis 6000 4500 1100mm 4000 3000 1000mm
Boring Diameter ≤Φ60mm Φ16-Φ80mm
Processing Depth ≤1000mm ≤1000mm

For more information, please contact:
sales7steel@163.com

Contact us